3
Operating Instructions and Parts Manual
24403
MIGHTY COMPACT
½” IMPACT WRENCH
WARNING
• Disconnect from air supply before changing
accessories or servicing.
• Check correct air pressure is maintained and not
exceeded.
• Due to possible presences of asbestos dust
from brake linings, when working around vehicle
brake systems we recommend you wear suitable
respiratory protection.
NOTE:
The manufacturer declines any and all
responsibility for damage to vehicles or components if
said damage is the result of unskillful handling by the
operator or of failure to observe the basic safety rules
set forth in the instruction manual.
WARNING
Read Rules for Safe Operation and Instructions Carefully.
IMPORTANT SAFETY INSTRUCTIONS
The warnings, precautions, and instructions discussed
in this manual cannot cover all possible conditions
and situations that may occur. The operator must
understand that common sense and caution are
factors which cannot be built into this product, but
must be supplied by the operator.
WARNING
1. Use only attachments recommended or sold by
manufacturer. Use of non-recommended attachments
may result in fire, electric shock or injury.
2. Do not disassemble the Impact Wrench. Take it
to a qualified professional when service or repair
is required. Incorrect reassembly may result in
electric shock or fire.
3. Keep air hose away from heat, oil and sharp
edges. Check air hose for wear before each use
and ensure that all connections are secure.
4. Only use impact sockets which are specifically
designed for use with an impact wrench.
5. Wear approved safety eye/face shield, ear
defenders and hand protection.
6. When not in use disconnect from air supply and
store in a safe dry, childproof location.
7. DO NOT use the wrench for task it is not
designed to perform.
8. DO NOT carry the wrench by the air hose, or
yank the hose from the air supply.
9. DO NOT operate wrench if you are tired or under
the influence of alcohol, drugs or intoxicating
medication.
10. DO NOT direct air from the air hose at yourself
or others.
DISPOSAL
At the end of the useful life of the OEMTOOLS Impact
Wrench, dispose of the components according to all
state, federal, and local regulations.
PURPOSE
The 24403 Mighty Compact ½” Impact Drive Wrench is a
combination of composite materials, alloyed metals and
twin hammer design resulting in a lightweight, durable and
powerful wrench that is suitable for professional garage use.
PRODUCT SPECIFICATIONS
Driver Size:
1/2”
Free Speed:
11000 RPM
Bolt Capacity:
16 mm
Working Torque:
450 Ft./Lbs.
Clutch Type:
Twin Hammer
Air Consumption: 4.7 CFM
Weight:
3.5 Lbs.
Length:
5 1/4”
Inlet (NPT)
1/4”
WARNING
Ensure the air supply is clean and does not exceed
90 psi while operating the wrench. Excessive wear
will result if air pressure is too high and /or you use
unclean air. This can shorten the product life and may
be dangerous causing damage and/or personal injury.
12/14
2014 ©OEMTOOLS