2
operating Instructions and Parts manual
24529
No GAs Loss A/C vALve
Core remover/INstALLer
Thank you very much for choosing an OEMTOOLS
Product!
For future reference, please complete the owner’s
record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is
important that you read the entire manual to become
familiar with this product before you begin using it.
This machine is designed for certain applications only.
OEMTOOLS cannot be responsible for issues aris-
ing from modification. We strongly recommend this
machine is not modified and/or used for any ap-
plication other than that for which it was designed.
If you have any questions relative to a particular
application, DO NOT use the machine until you have
first contacted OEMTOOLS to determine if it can or
should be performed on the product.
For technical questions please call 1-866-458-2472.
ImPortANt INstrUCtIoNs
AND sAFetY rULes
• Keep bystanders, children, and visitors away while
operating the A/C Manifold. Distractions can cause
you to lose control. Protect others in the work area
from injury.
• Stay alert. Watch what you are doing, and use
common sense when operating the A/C Manifold. Do
not use the tool while tired or under the influence of
drugs, alcohol, or medication. A moment of inattention
while operating the tool may result in serious personal
injury.
• Do not overreach. Keep proper footing and balance at
all times. Proper footing and balance enables better
control of the power tool in unexpected situations.
• Use safety equipment.
• Wear ANSI-approved safety glasses underneath a full
face safety shield. Nonskid safety shoes, hard hat,
or hearing protection must be used for appropriate
conditions.
• Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for
which it is designed.
• Store idle tools out of reach of children and other
untrained persons. Tools are dangerous in the hands
of untrained users.
• Maintain tools with care.
• Keep tools dry and clean.
• Properly maintained tools are less likely to bind and
are easier to control. Do not use a damaged tool. Tag
damaged tools “Do not use” until repaired.
• Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may
affect the tool’s operation.
• If damaged, have the tool serviced before using. Many
accidents are caused by poorly maintained tools.
• Use only accessories that are recommended by the
manufacturer for your model. Accessories that may
be suitable for one tool may become hazardous when
used on another tool.
• Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified personnel could result in a risk of injury.
• When servicing a tool, use only identical replacement
parts. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of injury.
• Maintain a safe working environment. Keep the work
area well lit. Make sure there is adequate surrounding
workspace. Keep the work area free of obstructions,
grease, oil, trash, and other debris. Do not use this
product in a damp or wet location.
• Maintain labels and nameplates on this product.
These carry important information. If unreadable or
missing, contact OEM for a replacement.
• Keep the handle dry, clean, and free from brake fluid,
oil, and grease.
• Before use, read and understand all warnings, safety
precautions, and instructions as outlined in the
vehicle manufacturer’s service manual. It is beyond
the scope of this manual to properly describe the
correct procedure and test data for each vehicle.
• To reduce the risk of discomfort, illness, or death,
read, understand, and follow the following safety
instructions. Avoid breathing A/C refrigerant and
lubricant vapor mist. Exposure may irritate eyes, nose,
and throat. To remove R134a from the A/C system, use
service equipment certified to meet the requirements
of SAE J2788--R134a recycling equipment. Additional
health and safety information may be obtained from
refrigerant and lubricant manufacturers.
• Always perform vehicle service in a properly ventilated
area. Never run an engine without proper ventilation
03/14
2014 ©OEMTOOLS
