● Always lower blade to the ground when the machine is unoccupied by
the operator to prevent unintentional bodily harm with the blade.
● Never allow unauthorized personnel or the general public into the
work area.
● The work area should be barricaded off to adequately keep all
untrained persons out of the work site. If an unauthorized person
enters the work area, stop the machine immediately and do not
restart the machinery until they have left the work area.
● Always allow a buffer safety zone around all surface preparation
activity.
● The STORM is not a toy. All operators must be over 18 years of age,
and must have read and reviewed the safety and procedures manual
before operating the machinery.
● The STORM is designed for surface preparation ONLY. It is not
intended for towing, pushing, or any other procedure not described in
this manual.
● No smoking or open flame is allowed while machinery is running or
within 50 feet of the machine.
● Operator must be sober, not under the influence of drugs or
medication, and under full control of all bodily senses while operating
this machinery.
● When transporting the STORM it is recommended to remove the
cutting head and use a transport dolly. When set up properly, this
procedure spreads the weight of the machine over 6 points rather
than just 4 and allows you to get over door thresholds without
damaging them.
● Always park the STORM on a level surface and chock the wheels.
Not doing this could lead to the machine rolling away.
● Make sure to unplug the power cord before operating the STORM.
WARNING:
Exposure to dust may cause respiratory ailments.
Potential Hazard