TOYOTA
Reference
450Q
Procedure
Issue B 5/23/16
Page | 13
f.
Connect the power wires to the fuse holder
by inserting the 12-gage stripped power wire
into the Blue butt connector and crimp.
(Fig.
6-9)
j.
Apply heat to activate the solder and heat
shrink insulator for the best connection
possible.
(Fig. 6-10)
7.
Installation of the Fuse Holder
a.
Remove the 10mm bolt from the battery’s
positive terminal.
(Fig. 7-1)
b. Install the ring terminal of the fuse holder
lead then re-install the 10mm bolt and
tighten. Note: Do not install fuses at this
time.
(Fig. 7-2)
Fig. 6-9
Crimper
Fig. 6-10
Heat Gun
Fig. 7-1
10mm Wrench
Fig. 7-2
10mm Wrench
