10
User manual
ENG
STEP 2 - HYDRAULIC SCHEME SETUP
Select a hydraulic scheme for controller operation.
Move between schemes with buttons
and
.
Confirm the selected scheme by pressing
.
The controller requires a confirmation of language
selection with the
button.
In case you choose the wrong scheme, return to
scheme selection with the
button.
Later you can change the selected hydraulic scheme with service parameter
S1.1.
STEP 3 - SETUP OF HEATING CURVE STEEPNESS FOR THE FIRST CIRCUIT
Set the heating curve steepness for the first heating
circuit.
Change the value with buttons
and
.
Confirm the selected value by pressing
.
The controller requires a confirmation of the set heat
-
ing curve steepness with the
button.
In case you choose the wrong heating curve steep-
ness, return to heating curve steepness selection
with the
button.
Later you can change the heating curve steepness with parameter P2.1. The
meaning of heating curve steepness is detaily described on page 37.
All schemes with mixing heating circuit
are available for radiators and floor/
wall heating.
