8
GB
Robotic swimming pool cleaner
Contents
GB
1
Introduction
8
2
Cautions and warnings
8
3
Operating instructions
9
4
Routine maintenance
10
5
Troubleshooting
11
6
Specifications
11
7
Exploded view and
spare parts list
12
Read these operating instructions carefully before using the equipment and store it for
future reference. If you sell or pass on the equipment, please hand over these operating
instructions along with the equipment.
The robot is an underwater cleaner. It is fully automatic, and mainly used to remove dirt
and impurities like hair, leaves and sand from the pool floor, walls and waterline.
Stairs in the pool will not be cleaned.
When started, the cleaning robot measures the pool size automatically, sets its duty cycle
and cleans the pool self-sufficiently.
Warning: Nobody is allowed to be in the pool while the pool robot is working.
Do not enter the pool while the robot is operating.
Warning: Keep the cleaning robot away from children.
Warning: Do not switch on the pool cleaner until it is fully immersed in the water.
Operating the cleaner out of the water may cause severe damages and
will result in loss of warranty.
Warning: Always remember to turn the power supply off and unplug it from the power
outlet before removing the cleaner from the pool.
Warnung:
Never pull the pool cleaner from the pool by using the cable.
Warning: Use the cleaner only at a water temperature b10 and +35 °C and at
a water depth of 0.5 to 3 m.
The pool robot is designed for a water surface of up to 100 m2.
Warning: Keep the controller box in a dry place which is approx. 3.5 m away
from the pool.
Introduction
1
Cautions and
warnings
2
