1. Using proper procedures as recommended by the vehicle manufacturer, carefully
disconnect the cables from your old battery and remove it from the vehicle. Return the spent
battery to the battery dealer for proper recycling.
2. Inspect existing battery cables for corrosion, acid damage or insulation deterioration.
Replace if deterioration is present.
3. Position your ODYSSEY in the battery holder and fasten firmly to the vehicle.
4. Connect the positive cable from your ignition to the Positive (+) terminal.
5. Connect the negative cable from your engine or chassis to the Negative (-) terminal.
6. Torque the bolt, screw or nut per the specification noted in table. If you’re using the
Accessory Bolt (C), hold the Brass Post (A) with vise grips and counter torque. Do the same
with General Motors™ automotive battery cable installation.
NOTE: This is a valve regulated sealed battery and never needs to have water or electrolyte
(acid) added.
Warranty will be void if opened!
B
A. Bolt
B. Washer
C. Battery
A. Brass Post
B. Helicoil Insert
C. Accessory Bolt
3/8“ Course Thread
(not included)
D. Battery
A
C
A
B
C
D
A
DIN
TERMINAL
3/8”-16 UNC
THREAD
B
A. 0.72”/18.2mm MAX
B. 0.96”/24.5mm MAX
M6 x 1
THREAD
0.61”
(15.5mm)
3/8-16 UNC
THREAD
0.74”
(18.8mm)
NTS
NTS
PC625
PC2150/31S
PC1500/34 &
PC1500/34-78
PC2150/31T
SAE
Terminals
PC2250
All Other Models
NOTE: PC535 Bolt installation
is in horizontal orientation.
PC1500/34-78
0.85
1.12
SIDE TERMINAL
3/8-16 UNC-2B
0.34 DEEP
TOP TERMINALS
POSITIVE
NEGATIVE
0.813
(20.7)
0.614
(15.6)
0
.7
3
2
(1
8
.6
)
0.813
(20.7)
0.677
(17.2)
0
.7
3
2
(1
8
.6
)
PC1500/34M
0.732”
(18.59mm)
POSITIVE
SAE TERMINAL
POSITIVE
MARINE STUD
3/8-16 THREAD
0.568”
(14.43mm)
0.732”
(18.59mm)
NEGATIVE
SAE TERMINAL
NEGATIVE
MARINE STUD
5/16-18 THREAD
0.568”
(14.43mm)
Publication No. 2602-0232, Rev. 5 - December 2006
www.odysseyfactory.com
3
INSTALLATION
Your ODYSSEY is normally ready to install right out of the box! Measure the battery voltage;
if it is 12.65 volts or greater, install; if less, then refer to the charging section.
ANY OF THE FOLLOWING WILL VOID YOUR WARRANTY:
• EXPOSING BATTERY TO GASOLINE OR DIESEL FUEL
• REMOVING THE LABELED COVER
• REMOVING OR DESTROYING THE BATTERY’S DATE CODE
DO NOT SHORT CIRCUIT YOUR ODYSSEY’S TERMINALS!
Remove any metallic items such as watches, bracelets and other personal jewelry to ensure
safe installation.
Summary of Contents for PC1700T
Page 1: ...O W N E R S M A N U A L...
