Left Wheels
Forward
Right Wheels
Forward
Left Wheels
Back
Right Wheels
Back
Programming
Buttons
USB Charging Cord
Slap
Car
LiPo
Battery
2
SETTING UP THE REMOTE CONTROL
CHARGING THE SLAP CAR’S BATTERY
OPERATING SLAP CAR
1. Use a phillips screwdriver to open the
battery cover.
2. Install 2x new AA batteries taking care to
match the correct polarity (+/-).
3. Close the cover and reinstall the screw.
- For best results the Slap Car needs to be within a 15’ foot range of the
controller.
Tip. Full charge takes approx. 1hr
(Colors may vary)
1. Remove the battery from the Slap Car
as shown in the Slap Car setting up
instructions.
2. Connect the battery to the USB
charging cord connector.
3. Plug the USB cord into a 5v1a USB charger.
4. The charger light will turn on to indicate charging. When the charger light
goes out charging is complete and you can reinstall the battery.
Controller Functions
