14
Add SSD Memory
M.2 Slot
on the bottom of the Winbook for the expansion of an SSD
memory (in the variations 2242 and 2280
with Key B or M+B and
SATA Interface
).
Place the device on a soft, even flat surface, on the back of the
screen so that the label is legible on the lower right side of the SSD
tray.
Insert the memory in the M.2 slot paying close attention to the
correct orientation.
Damage to the Memory and slot may occur if not inserted correctly.
- Memory modules with Key B have one separate socket area
consisting of 5 separate contacts. Insert the module and
insure that the contacts are located at the bottom of the
module.
- Memory modules with Key B + M have two separate socket
areas. Insert the module and insure that the contacts are
located at the bottom of the module.
When the memory is installed, fix it in the appropriate position
(depending on the memory) with the screw (included in the slot).
To remove the memory, you must first unscrew the mounting screw
and then use a screwdriver to pry the memory and then pull it out to
the rear.
Summary of Contents for Winbook 14
Page 1: ......
Page 10: ...9 Buttons Ports ...