CARE INSTRUCTIONS
CAUTION: DISCONNECT the unit from an electrical power source
before performing any maintenance or cleaning on the unit.
SYSTEM CASE CLEANING
Exterior
The exterior of the Odorox® product can be cleaned with mild dishwashing
detergent and a clean cloth, and then rinsed with clean water. DO NOT use any
all-purpose cleaners with harsh detergents or abrasives, as these may damage
the exterior of the equipment and void any warranty. Care should also be
taken to avoid spraying or otherwise directing detergent or water into or around
electrical components.
Interior
The interior of the Odorox® product can be cleaned in the same manner as the
exterior with the exception of the optics and optics’ housing.
OPTIC CLEANING
Cleaning of the Odorox® optics is recommended to maintain peak processing
efficiency. Fingerprints, smudges, dirt, dust particles, etc. will interfere with the
hydroxyl production and should be avoided.
Note: Remove the optics from the optic chamber prior to cleaning to avoid
any damage to the optics during the cleaning process (refer to the Optic
Replacement Instructions for proper removal).
To clean the optics, use a solution of 10% Isopropyl Alcohol and 90% filtered/
distilled water on a clean lint-free cloth and wipe gently. Do not use any type of
commercial glass cleaner. Using another lint-free cloth, gently wipe the optic until
completely dry. Allow the optic to dry completely (20 minutes) before operating
the system.
Summary of Contents for BOSS XL3
Page 1: ......
