3.3. Inflating the Kite
1. Lay the kite out on the sand,
grass or a surface free of hard or
sharp objects as they could
damage it.
2. Turn the Kite with the Leading
Edge into the wind, positioning
the bottom side of the kite up
and connect the pump leash with
the leash attachment on the kite
3. Close the deflate valve at the
end of the wingtip and make sure
to close the velcro webbing too.
5. Attach the pump to the inflate
valve and inflate the kite until
the leading edge and the struts
are completely inflated and the
pressure reaches 7 PSI.
K1 - YO Kite User Manual
7
4. Verify that all the one-pump
system cleats are open.
7. Squeeze the one pump system
cleat on each strut to isolate the
inflated struts (Click noise).
6. Disconnect the pump and
close the inflating valve.
