ODM RP 560 User Manual Download Page 27

Page: 27 / 27

Page 27

M-UM035-06 RP 560

Certifications and Contact Information

This product conforms with health, safety, and

environmental protection standards for products sold within

the European Economic Area (EEA). This product was tested

by an ISO 17025 accredited laboratory and complies with

the following CE directives and standards listed below:

Directives:

Electromagnetic Compatibility (2014/30/EU)

Low-Voltage (2014/35/EU)

Standards:

EMC: EN 61326-1:2013 Industrial

Safety: EN/IEC61010-1:2010+A1:2016

Call 603-524-8350
Email

[email protected]

Visit us online at

www.odm-inc.com

Contains FCC ID: T9JRN4020

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy, and if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other coun-

tries. Android is a trademark of Google LLC. Apple is a registered trademark of Cisco in the U.S. and

other countries and is used under license. The Bluetooth word mark is a registered trademark owned

by Bluetooth SIG, Inc.

Summary of Contents for RP 560




























Search results

Summary of Contents for RP 560

Reviews:

Related manuals for RP 560

Brands by name

Popular brands

ODM RP 560, User Manual

Search results

Summary of Contents for RP 560

Reviews:

Related manuals for RP 560

Brands by name

Popular brands