Odisei Music Travel Sax, User Manual

Page: 10 / 13

19 18
Maintenance
You can find the video in the following link of our webpage or by scanning the
QR code with your smartphone:
www.odiseimusic.com/get-started
We have designed the Travel Sax to be durable and easy to use,
but regular cleaning and mantainance will ensure that it stays in
good condition. It will also give you the best possible experience
while playing it.
• After playing, take off the mouthpiece and blow the Travel
Sax without it to remove all the saliva that hasn’t been
removed from the inside.
• When not in use, keep the mouthpiece and the reed dry and
clean. For a better cleaning use some water and a cloth for
drying.
• Make sure that both adaptor and Travel Sax connection are
completely clean after you play.
• For a better hygiene always clean the saliva in the inner
side of the blowing tube of the Travel Sax by trying to use a
cleaning cloth. Also remember to clean the bottom of the
Travel Sax, where the saliva comes out.
• Use the Odisei Music microfiber cloth to remove the dust
carefully from the Travel Sax.
• Never apply water directly to the Travel Sax.
Troubleshooting
Problem Cause & Correction
No power
• The Travel Sax ran out of battery.
• Plug in the charging cable.
• Check whether electricity failed.
• Check the condition by operating other electronic devices.
No sound
• The Travel Sax is
not connected
to the device. Plug in the
USB
cable to a device or connect it via Bluetooth through the app.
• The unit or your smart device’s volume is set to minimum.
Check and adjust the volume of the speaker or your device’s
volume.
Bluetooth pairing
does not work
well
• Switch Bluetooth off and on again on your Bluetooth device,
then try pairing again.
• Be sure your Bluetooth device is on .
• Remove the
obstacle
in the path of the Bluetooth device and
the unit.
• Make sure the distance between both devices is less than 6m .
The app doesn’t
work properly
• Make sure that your smart device is compatible with the app.
• Make sure that the application is the latest version .
The sound has
delay
• Make sure that you are not using two Bluetooth connections
at the same time (ex. Travel Sax to phone device and also
phone device to Bluetooth headphones). It will
increase the
latency in your Bluetooth, so the sound will have a huge delay.
• In the app settings try to adjust the “ Latency ” parameter to
see which works better (Low, Mid or High) for your phone.
Usually
Mid
works for every phone, but in case you have a
low performance phone, try to use High . If you have a high
performance device, and with Mid it doesn’t work as expected,
try to use Low .
The Travel Sax
doesn’t charge
• Make sure to turn ON the Travel Sax before pluging in the
USB-C cable.