8
Use one piece of foam (A-2) to cut a
shape that fits around the CPU socket on
the motherboard. The arrangement of
surface components is different for every
motherboard, therefore, the exact shape
of the final piece of foam will vary from
one motherboard to the other.
It is not necessary to cut out the entire
length of the CPU-locking lever, a small
cutaway suffices (see arrow).
This is what the foam should look like
when properly installed (see also second
panel above).
Mount the piece of foam over the screws
on the motherboard and, if necessary,
press it down to ensure close contact with
the motherboard.
FO
AM A-2
FO
AM A-2
FO
AM A-2
MOTHERBO
ARD
FO
AM A-2
MOTHERBO
ARD
OCZ Technology Group
Manual
After installing the bracket underneath the motherboard, you will need to install one
layer of insulation at the top surface of the motherboard.
