manualshive.com logo in svg

OCULUS Pentacam, Instruction Manual

Share
Download
OCULUS Pentacam Instruction Manual Download Page 6

2  Safety instructions

2 / 29

Instruction Manual Pentacam® / Pentacam HR® (G/70700/0109/en)

2

Safety instructions

2.1

Safety instructions concerning organisation

The law requires that the manufacturer expressly informs the user about safety aspects
concerning the handling of the Pentacam® / Pentacam HR®. This chapter contains a
summary of the most important points regarding these safety matters.

Attention

Do not use the device if you have not understood the instruction manual.

Î

Make sure to keep this instruction manual in a safe place and available to operating
personnel at all times.

Î

Observe the legal regulations with regard to accident prevention.

The Pentacam is a high-quality technical product. To ensure that it functions correctly
and safely we recommend the following: Have the Pentacam checked by our service per-
sonnel or an authorised dealer every two years. If an error occurs which you are unable
to correct, label the device as "out of order" and contact our service department.

2.2

Pictogram definitions

Attention

Identifies a potentially dangerous situation which may cause minor injury or damage to
property. 

Note

Instructions for use, and useful or important information.

☞

Note

Identifies important information about the product or on how to use it, which requires
special attention.

Summary of Contents for Pentacam


































Reviews:

No comments

Brands by name

Popular brands

Load more brands