8 Set up and Connection
Instruction Manual Myopia Master® (G/68100/EN Rev08)
19 / 84
8
Set up and Connection
8.1
Initial Start-up
Before you can operate the Myopia Master® for the first time, you must
set it up and adjust it
get trained
Attention
Incorrect measurements / equipment damage due to a lack training
Before first use: Let OCULUS or an authorized dealer train you in the
operation of the Myopia Master®.
Incorrect measurements / equipment damage due to incorrect set-up
Before the first use, make sure the installation and connection of the
“Myopia Master®” examination area is completed by our service or
by a professional authorized by OCULUS.
Note
Do not expose the Myopia Master® to any vibrations, shocks,
contaminants, moisture, or high temperatures.
Handle the optical device with care.
8.2
Set-up Jobs for Initial Start-Up
Wait approx. 3-4 hours after transport before operating the Myopia
Master®. If the Myopia Master® was stored in a cold room or vehicle
during the cold time of the year, a significant change in temperature
may cause condensation to appear on optical parts of the Myopia
Master®.
Check if the transportation safety device is unlocked,
