OCULUS Corvis ST, Instruction Manual, Page: 46 / 86

12 Perform a Mea s urement
40 / 80 Instruction Manual Corvis® ST (G/72100/XXXX/EN 1019 Rev01)
12.7 U s ing Patient Data Management
When you have completed an examination, you can continue processing
the patient data in Patient Data Management
You can do the following to the patient data

rename, sec. 12.7.1, page 40

export, sec. 12.7.2, page 40

save, sec. 12.7.3, page 41
You can also change the Patient Data Management settings, User guide .
12.7.1 Rename Patient Data
Patient data can be changed retroactively after it has been added.

Press the [Change] button.
The input boxes for patient data are now enabled, and the cursor
jumps to the "Last name" field.

Change the entries in the individual boxes.

Press the [Save] button.
12.7.2 Exporting Patient Data
For example, patient and examination data can be exported for
forwarding to another clinic.

Select the patient and also one of the examinations in the respective
list.

Press the [Export] button below the patient list. The following dialog
appears:
☞
The options for import and export of data are set as defaults in the
"settings" field, see
User guide .
Depending on the settings you may not have to perform all of the follo-
wing steps (for example selection of the directory).
1 Select destination
2 [...] button
3 [Cancel] and [Export] buttons
Abb. 12-9: "Export patient data" dialog
1
2
3