OCULUS BIOM 5, Conditioning Instructions

Page: 17 / 32

5 Cleaning and Disinfection
Conditioning Instruction BIOM® 5 (G/55185/0818/en) 13 / 26
5.4 Manual Cleaning/Disinfection
The method described below has been validated for manual cleaning/
disinfection:
☞
If you clean and disinfect your equipment manually, you must verify your
procedure independently and validate it specific to the product and the
method.
Cleaning tools

Cleaning solution with 0.8% detergent (Cidezyme/Enzol from
Johnson & Johnson)

Water
Procedure
☞

Perform a manual disinfection in accordance with the requirements
of the VAH or the applicable standards.

Check that the components have no visible signs of soiling, sect. 5.2,
page 8 .

Place the components in the cleaning solution for 5 minutes at 40°C.
The BIOM® 5 must be fully covered.

Rinse the components for 5 seconds under running water (static
pressure 4.2 bar).