Ocular LTE Plus, Installation Manual

Page: 7 / 14

Maintenance
Safety Warning
▲
▲
▲
▲
▲
MANUFACTURER
Ocular Charging
ocularcharging.com.au
sales@ocularcharging.com.au
Ocular LTE is only recommended for use in residential applications and use outside of
this area (i.e. for commercial application) is outside of warranty.
In order to ensure the normal service life of the charging station and reduce risk, mainte-
nance must be performed every 12 months. The maintenance and installation of the
equipment must be completed by a licensed electrician. Visit ocularcharging.com.au
to book your service.
The product should be placed at an ambient temperature of -25C~+55C in relative
humidity of no more than 95%. The air should not contain acids, alkalis, or other
corrosive and explosive gases.
Ocular Charging Stations are subject to stringent quality inspections. From the day of
purchase, any problem quality can be reflected to the dealer within two years.
Any direct damage or malfunction caused by neglect, incorrect use, installation, usage,
repair by the users or natural damage are not covered by the warranty.
Regularly check whether the charging station has visible damage.
Make sure that all safety facilities are available at all times and are tested regularly to
ensure they can operate normally. Visit ocularcharging.com.au for a yearly mainte-
nance check according to Australian standards.
If a ground fault occurs, it must be assumed that the cable carries voltage. Please
confirm that there’s no high-voltage power in the system before inspecting the
charging station.
Persons who install and use charging stations must obey the principles and regula-
tions mentioned to ensure personal and equipment safety.
Before powering on the device, please confirm that the device is properly grounded to
avoid unnecessary accidents.
All tools’ unnecessarily exposed metal parts should be insulated to prevent them from
touching the metal frame to avoid short circuits.
Do not modify, retrofit, or change any part by yourself under any circumstances.
To ensure the service life and stable operation of the charging station, the operating
environment should be kept clean as possible with a relatively stable temperature and
humidity. The charging station must not be used in a flammable environment or
environments with volatile gas.
Be sure to confirm that the input voltage, frequency, circuit breakers and other
conditions of the device meet the specifications before the device is powered on
▲
▲
▲
▲