Ocular Robotics RobotEye VISION REV25, User Manual

Page: 14 / 28

Basics 10
www.ocularrobotics.com Ocular Robotics Pty Ltd
2.5 Safety
The RobotEye VISION REV25 System is a high speed device. All instructions regarding
safe operation of this system should be strictly followed.
Protection Class 3. The device operates with a separated extra low voltage
(SELV) of 24 Volts DC.
The device may only be operated as intended and in faultless condition. Safety
and warning signs must not be removed.
The REV25 Vision System is in accordance with Ingress Protection 65 (IP65).
The device is protected against dust and jet water.
All instructions regarding safe operation of this system should be strictly followed.

The user is responsible for the safe operation and maintenance of this system at all
times.
 Installers of the sensor are responsible for ensuring their safe use in accordance
with all applicable regulations in the state, country or territory of use.

The device’s rotating head is not designed to accommodate for any alterations or
additions. High speed projectiles may result.

The device must be securely mounted during operation to prevent unstable motions
or vibrations.

Ensure that the Robot Eye head will not contact anything while operating in its full
range of movement.

Do not try to hold or touch the Robot Eye head while operating.

Do not attempt to disassemble the sensor. Improper disassembly will destroy the
optical alignment of the sensor and necessitate factory repairs. Tampering with any
enclosure will void warranty coverage.

The manufacturer will not accept liability for any resulting damages caused by the
non-observance of this manual or any unauthorised modification to the system.