Octopus F620 HFA Operating Instructions Manual Download

Page: 48 / 103

Step by Step

Enhanced phone functions

During a call

Using call waiting (second call)

Callers can still reach you while you are engaged in another call. A

signal alerts you to the waiting call.

You can ignore or accept the second call.

When you accept the waiting call, you can either end the first call or

place it on hold and resume the call later on.

You can block the second call or the signal tone (

Page 49).

Prerequisite: You are engaged in a phone call and hear a tone (every

six seconds).

Ending the first call and answering the waiting call:

Replace the handset. Your telephone rings.

Pay attention to the notes on voice encryption

Page 59.

Answer the second call. Lift the handset.

Placing the first call on hold and answering the second call:

Select and confirm the option shown.

Pay attention to the notes on voice encryption

Page 59.

You are immediately connected to the second caller. The first party is

placed on hold.

Ending the second call and resuming the first one

Confirm.

Replace the handset. "Recall" appears on the display.

Lift the handset.

Call waiting?

Quit and return?

Summary of Contents for F620 HFA








































































































Search results

Summary of Contents for F620 HFA

Reviews:

Related manuals for F620 HFA

Brands by name

Popular brands

Octopus F620 HFA, Operating Instructions Manual

Search results

Summary of Contents for F620 HFA

Reviews:

Related manuals for F620 HFA

Brands by name

Popular brands