Octopus F620 HFA Operating Instructions Manual Download

Page: 47 / 103

Enhanced phone functions

Step by Step

Associated dialing/dialing aid

If this function has been configured (contact your service personnel),

you can use a dialing aid to dial numbers and set up calls for your

telephone.

The operating procedure depends on whether the dialing aid is con-

nected to the S

bus or the a/b (T/R) port.

You can also use your system telephone as a dialing aid for other tele-

phones.

Dialing aid on the S0 bus

On the PC, select a destination and start dialing.

The speaker on your telephone is switched on. Lift the handset when

the other party answers.

Dialing aid at the a/b (T/R) port

On the PC, select a destination and start dialing.
"Lift the handset" appears on the PC screen.

Lift the handset.

Dialing aid from your telephone for another telephone:

Press the key shown.
Select and confirm the option shown.

Enter the internal station number ("Dial for:").

Enter the number you wish to dial.

*67=Associated dial?

Summary of Contents for F620 HFA








































































































Search results

Summary of Contents for F620 HFA

Reviews:

Related manuals for F620 HFA

Brands by name

Popular brands

Octopus F620 HFA, Operating Instructions Manual

Search results

Summary of Contents for F620 HFA

Reviews:

Related manuals for F620 HFA

Brands by name

Popular brands