Slowly turn on water supply and check each Hydro Reservoir for leaks. Run water until it
covers the bottom of all the Hydro Reservoirs to make sure each one is at the proper level.
Adjust individual Hydro Reservoirs with shims or blocks as needed.
NOTE: WHEN CHECKING FOR PROPER WATER LEVELS DURING INITIAL SET UP BYPASS THE FLOAT VALVE IN THE CONTROL
RESERVOIR TO FILL HYDRO RESERVOIRS FASTER. SIMPLY RUN YOUR WATER SUPPLY DIRECTLY INTO THE TOP OF THE
CONTROL RESERVOIR. CONTINUE THAT WAY TO FILL FOR FIRST TIME. BE SURE TO PLACE YOUR FLOAT VALVE BACK IN ITS
PLACE, WHEN FINISHED.
