Page 4
Copyright© 2011 Octet Matrix Audio
Specifications
System Installation
System installation consists of the following steps:
1)
Determine system configuration using the System Setup Flow Chart.
2)
Determine desired primary component locations and connect system components.
3)
Test system for wireless stability.
4)
Troubleshoot system set up, if necessary.
5)
Install components in primary location. The speakers can be moved, but may require
wireless troubleshooting in each new location.
6)
Confirm system operation and optimize wireless dynamic range.
Following the System Installation steps in this order will provide a trouble free system
installation with optimized performance, and no drywall repairs!
Digital Wireless System
Transmission frequency
5.8 GHz
Transmission method
PCM digital audio
Transmission data rate
> 3 MBPS
Audio sampling rate
44.1 kHz
Audio bit depth
16 bit
Audio sampling method
128 times oversampling
Error correction
1/2 rate FEC
Signal to noise ratio - A weighted
91 dB typical
Dynamic range
91 dB typical
Audio latency
< 1.0 ms
Transmission range
Typically 50 ft. indoors through walls & ceilings
(non metallic)
Amplifier
Frequency response
7 Hz - 22 kHz
Amplifier power output - 8 ohm load
50 watts RMS
THD @ 1 kHz, 50 watts
0.04%
Power efficiency
85% typical
Channel separation
94 dB typical
Mechanical
Wireless amplifier dimensions (ea.)
3-3/4" wide x 1-1/2" tall x 5-3/4" deep
(95mm x 38mm x 146mm)
Transmitter dimensions
7-1/2" wide x 1-3/4" tall x 6-3/4" deep
(191 mm x 45mm x 172mm)
Shipping weight (system)
3.5 lbs. (1.59 kg)
Shipping dimensions (system)
8-1/2" wide x 10-1/4" deep x 6" tall
(216mm x 260mm x 152mm)
Warranty
2 Years
