Octave V 16 Single Ended, Owner'S Manual

Page: 10 / 34

11
3. GETTING STARTED
3.1. Unpacking, package contents
Scope of delivery

Integrated tube amplifier V 16 Single Ended Line
 1 set power tubes (serial equipment: 2 pc KT120)
 Power cord
 Remote control

2 screwdrivers: 1 x 3 mm Allen key for removing the cover
1 x TX10 screwdriver for TX10 screws
 4 x M4 x 10 Torx screws TX10 for fixing the tube plate (without the grille)
 Octave cleaning cloth and soft gloves

Owner‘s manual with certificate
3.2. Removing the grille
Procedure


For your own safety, make sure that the amplifier is not connected to mains.
 Completely remove the four hexagonal screws using the Allan key supplied. There are
two screws on each side.

Carefully pull the grille upward to remove.