12
Replacing a Fusion Monitor
Installing the Replacement Monitor
22. Transfer both hinges to the replacement monitor and fasten them to the monitor using the screws removed
in the previous step. Torque 10 Lbf*in. Do
not
over torque. If the screws removed from the previous monitor
are lost or damaged, you can find replacements in your kit.
23. Remove the metal cable clamp from the side of the defective monitor and fasten it to the replacement monitor.
Installing metal cable clamp
24. Transfer the assembled replacement monitor to Fusion Music System.
IMPORTANT:
TouchTunes recommends that you enlist the help of an assistant to perform the
next few steps to ensure that the monitor is properly supported and does not fall before the
screws and bolts that support the monitor have been re-installed.
