Octave HP 500 SE, Manual

Page: 24 / 27

26
11. TECHNICAL DATA AND DIMENSIONS
Overall dimensions of the preamplifier in mm
ca. 460
139 147
393
HP 500 SE
147
435
Features
 The HP 500 SE is fitted as standard with two RCA phono outputs and one XLR outputs.
 The XLR output is transformer-coupled and galvanically isolated.

The HP 500 SE has separate inputs for MM/MC.
 An optional phono MM and MC module may be added any time.
 MC input impedance is adjustable over a wide range.
 Soft-start for heaters, operating voltage and signal output. This results in maximum
service life of the tubes and noise-free switch-on/off. The output is enabled after 4
minutes.
 The line stage has two switchable gain settings
 Standby function to minimize power consumption and reduce startup time (for periods up
to several hours).
 Outboard power supply with multiple screened mains transformer and built-in mains filter.