Octave HP 300 SE, Owner'S Manual

Page: 23 / 28

24
12. TECHNICAL DATA AND DIMENSIONS
In- and Outputs
Inputs 3 x RCA (one is phono with the option phono
otherwise it is a line level input), 2 x XLR
Bypass-Function for input AUX or XLR
Outputs 2 x RCA, 1 x XLR, 1 x Monitor (RCA)
Ratio of the XLR Transformer 1:0.5:0.5
PIN assignment XLR 1 = GND, 2 = Plus, 3 = Minus
Line stage
Output impedance 50 Ohm RCA; 150 Ohm XLR
Output impedance Monitor Out 100 Ohms
Maximum Output Level 9V
Maximum Output Current RCA / XLR 0.18A / 0.06A
Gain high 25 dB = 18.5
Gain med 19 dB = 8.8
Gain low 12 dB = 4
Signal-to-noise ratio: gain high - 92 dB
Signal-to-noise ratio: gain low - 100 dB
Signal-to-noise ratio: gain low - 108 dB
Frequency response Gain high RCA 10 Hz – 200 kHz -0.1 dB
Frequency response Gain med RCA 10 Hz – 200 kHz -0.25 dB
Frequency response Gain low RCA 10 Hz – 200 kHz -1.5 dB
Total harmonic distortion, Gain Low/Med/High 0.005%/ 0.007%/ 0.003% at 3V / 7.5
kOhm
Channel separation
90 dB 1 kHz
Crosstalk rejection between inputs - 100 dB 1 kHz
Input impedance 100 kOhm
Channel tracking of volume control 0.5 dB - 70 dB
Phono MC
RIAA equalization accuracy 0.3 dB 15 Hz - 20 kHz
Subsonic filter corner frequency 15 Hz / - 3 dB
Input impedance 30 - 1000 Ohms
Sensitivity 0.2 mV / 0.7 mV
Gain MC Gain Low – Monitor OUT 58 dB
Gain MC Gain Low – Pre OUT Gain Low: 70dB, Med: 77dB, High: 83dB
Gain MC Gain high – Monitor OUT 67 dB
Gain MC Gain High – Pre OUT Gain Low: 79dB, Med: 86dB, High: 92dB
General:
Power consumption 35 VA
Weight Preamp / Power Supply 9 kg / 3 kg
Standard accessories mains power cord, remote control
Dimensions Preamp 438 x 78 x 390 mm (W x H x D)
Dimensions Power Supply 110 x 77 x 277 mm (W x H x D)
(see page 25)