10
Serial Data (RS-232)
Serial control data can be sent using the RS-232 ports from
Transmitter to Receiver unit for controlling the attached display.
A 3 pin Phoenix connector is provided to connect with a RS-232
serial cable. Prepare your serial cable according to diagram below
The following shows the cable configuration for sending serial
commands from the TX to the RX ( display side).
Sending Serial Commands from TX unit to RX Unit.
Serial Port cable
( TX side)
Controller
Side
Serial Port cable
( RX side)
Summary of Contents for HD70STP-EX
Page 1: ...1 HD70STP EX Installation Guide ...
Page 4: ...4 Application Diagram ...
