![background image](http://html2.mh-extra.com/html/octane-fitness/pro3700/pro3700_assembly-manual_3298990010.webp)
10
7. Adjust arms (optional)
Note: Before completing this step, ride the elliptical cross trainer for a few moments to get
a feel for the arm motion. If the reach of the arm motion feels right (as it will for most users),
proceed to step 8. If the reach is too long or too short, carefully follow these steps to shorten or
extend the reach by approximately 1.5 inches:
a. locate the arm link that connects to the black bar (pivot)
inside the machine. the black bar has three holes in it with
the arm link attached through the center hole with a 13mm
nut.
b.
While supporting the arm,
remove the 13mm nut and
carefully ease the link from the center hole in the black bar.
to extend the reach of the arm, re-insert the link in the hole
closest to the front of your elliptical trainer. to shorten the
reach, re-insert the link in the hole closest to the user end of
the machine.
c. Replace the nut and tighten.
This connection must be
very tight.
d. Repeat for the other arm.
should you have any questions or concerns in making this
adjustment, please contact your local service provider or
contact Octane Fitness customer service at 1.888.OctAne4,
ext. 1.
8. Place handlebar covers
a. Position the handlebar cover (H) at the base of the handlebar
(F or G).
b. Press cover onto handlebar until it snaps into place.
c. Repeat for other handlebar.