37
PROBLEM
The front panel does not
display the time.
Time displayed on the front
panel is incorrect.
SOLUTION
DiSEqC 1.0
• Check that you have connected the LNBs to correct
connections on the switch.
• Check that you have set the connected Setting in the
Installation menu.
DiSEqC 1.2
• Check that you have selected this in the Installation
menu.
• Check that the dish is aimed at the correct satellite.
• Make sure you have switched on the STB.
• Switch the STB on and turn to a service to allow the STB
to receive the time sent with the signal by the service
provider.
• Front panel will only display the time in Standby mode.
• Adjust the time in the Time Settings menu.
How to upgrade s/w (S/W Download )
1. Boot Mode download
Step1. Insert USB(FAT32) Memory to front slot(2.0 port),
S/W file(extension is *.mdl) must be only in the root directory of the USB.
Step2. Press Front UP KEY and Power Switch on.
Step3. you can see the downloading procedure on the front panel.
Step4. do not power off, if it is finished download s/w, STB will be rebooting
automatically.
2 .Menu Status download
Step1. Insert USB that is must included s/w (*.mdl)
Step2. Press File browser key.
Step3. Press Left/Right key, go to s/w Browser. you can see *.mdl in s/w Browser.
Step4. Move cursor to *mdl and then press OK.
Step5. you can see the downloading procedure on the front panel.
Step6. do not power off, if download is finished, STB will be rebooting .
