1.Manual mode: Press MANUAL once, the green light will be on
(Manual mode), press M/A can control the Relay ON/OFF
(ON: red lights on, OFF: red lights off).
2.AUTO mode: Press MANUAL again, the green light will be off
(Auto mode), the ON/OFF will be controlled by the transmitter.
10. Receiver Operation (By press MANUAL to switch the
receiver operation mode)
1. Under the AUTO running mode, press MIA on the receiver for 10
secs to enter this mode, the green light will be ashing.
2. Remove the back cover of the transmitter, hold the LEARN button
on the PCB board for 3 secs, the receiver green light stops
ashing when it received the signals. Then the thermostats is
paired and the transmitter can control ON/OFF to the receiver
now.
11. LEARN CODE
-13-
