background image

4

 - 

www.oCOSMO.com 

oCOSMO CE2401 LED HDTV User Manual 

SAFETY INSTRUCTIONS

                                                 

 

 
This product is designed and manufactured to operate within defined design limits, and 
misuse may result in electric shock or fire. To prevent the product from being damaged, 
the following rules should be observed for the installation, use and maintenance of the 
product. Read the following safety instructions before operating the display. Keep these 
instructions in a safe place for future reference. 

 

 

To avoid the risk of electric shock or 
component damage, switch off the 
power before connecting other 
components to the TV. 

 

Unplug the power cord before 
cleaning the TV. Please use the 
included custom bezel cleaning cloth 
for cleaning the bezel of the TV only. 
Do not use a liquid or a spray cleaner 
for cleaning the product. Do not use 
abrasive cleaners. 

 

Always use the accessories 
recommended by the manufacturer to 
insure compatibility. 

 

When moving the TV from an area of 
low temperature to an area of high 
temperature, condensation may form 
on the housing. Do not turn on the TV 
immediately after this to avoid causing 
fire, electric shock or component 
damage. 

 

Do not place the TV on an unstable 
cart, stand, or table. If the TV falls, it 
can injure a person and cause serious 
damage to the appliance. Use only a 
cart or stand recommended by the 
manufacturer or sold with the TV. 

 

Any heat source should maintain a 
distance of at least 5 feet away from 
the TV, i.e. radiator, heater, oven, 
amplifier etc. Do not install the product 
too close to anything that produces 
smoke or moisture. Operating the 
product close to smoke or moisture 
may cause fire or electric shock. 

 

Slots and openings in the back and 
bottom of the cabinet are provided for 
ventilation. To ensure reliable 
operation of the TV and to protect it 
from overheating, be sure these 
openings are not blocked or covered. 

Do not place the TV in a bookcase or 
cabinet unless proper ventilation is 
provided. 

 

Never push any object into the 
ventilation slots of the TV. Do not 
place any objects on the top of the 
Product. It could short circuit parts 
causing a fire or electric shock. Never 
spill liquids on the TV. 

 

Do not use the TV in a portrait format 
(by rotating 90 degrees) under high 
temperature environment (25°C or 
higher), since this would retard heat 
dissipation and would eventually 
damage the TV.  

 

The TV should be operated only from 
the type of power source indicated on 
the label. If you are not sure of the 
type of power supplied to your home, 
consult your dealer or local power 
company. 

 

The power cable must be replaced 
when using different voltage from that 
specified in the User Manual. For 
more information, contact your dealer. 

 

The TV is equipped with a three-
pronged grounded plug, a plug with a 
third (grounding) pin. This plug will fit 
only into a grounded power outlet as a 
safety feature. If your outlet does not 
accommodate the three-wire plug, 
have an electrician install the correct 
outlet, or use an adapter to ground the 
appliance safely. Do not defeat the 
safety purpose of the grounded plug. 

 

Do not overload power strips and 
extension cords. Overloading can 
result in fire or electric shock. 

 

The wall socket should be installed 
near the equipment and should be 
easily accessible. 

Summary of Contents for CE2401




















































Reviews: