adjusting the LWS rod bracket
1
2
The O-Box WM mattebox can be attached to a
camera fitted with an OConnor Follow Focus with
the camera rods mounted above or below the
camera lens. The complete O-Box WM mattebox
assembly, including a suitable lens adapter, is then
mounted flush on camera rods using the 15 mm
LWS rod bracket.
The O-Box WM comes with an LWS rod bracket
attached. Mount the O-Box WM onto camera rods
above the camera using a 3 mm Allen or hex key
to unscrew the two screws holding the LWS rod
bracket and remove the bracket.
Attach the LWS rod bracket at the top of the rear
clamping interface. Use the two screws to secure
the bracket in place.
22
