Ocom OCPP-M05, Instruction Manual

Page: 10 / 23

Button Operating Instructions
POWER
（
Green Light
）
FEED
（
Rad Light
）
Printer Status
OFF OFF Printer Close
ON
（
Always
）
Off Printer open and have paper
ON(Always
）
Flash Printer Open , without paper
ON
（
Always
）
ON
（
Always
）
Printer have paper
Under the normal working status, the paper feeding begins when
press
【
FEED
】
button, and stop when loosen
【
FEED
】
button.
the printer paper feed
Power off the printer, then hold down the
【
FEED
】
button and
press the power button at the same time. Wait 2 seconds ,then
loosen the
【
FEED
】
button,the current setting will be printed out.
The printer Self test
Power off the printer, then hold down the
【
FEED
】
button and
press the power button at the same time. Wait until the power
indicator & 【 ERROR 】 led are both on, and then 【 ERROR 】 led goes
off, then loosen the 【 FEED 】 button, the language setting status
will be printed out.
Transformation in both English
and Chinese
Power off the printer, then hold down the
【
FEED
】
button and
press the power button at the same time. Wait until the power
indicator &
【
ERROR
】
led are both on, and then
【
ERROR
】
led goes
out, after,
【
ERROR
】
led goes on again ,then loosen the
【
FEED
】
button, the density setting status will be printed out. (It has
three levels setting for printing density, it is a circle Low
level  Middle level  High level  Low level…, Please switch the
density status by repeating operation presented above.)
Set printing density
Power off the printer, hold down the
【
MODE
】
button and press
the power button at the same time. Wait until the power
Hexadecimal printing