Ockelbo B18 AL, Owner'S Manual

Page: 56 / 64

6. MAINTENANCE
__PAGE 48
equipment that may corrode or become moldy in moist conditions, and store
them in a dry place.

Spray the electrical connectors with a suitable moisture repellent antioxidant.

*Remove the battery and store it in a warm, dry place. Charge it at least twice
during the winter. Spray the electrical connectors with a suitable moisture
repellent antioxidant.

Check conditions of anodes (see chapter 6.2.3). Replace if needed. Clean the
surface between anodes and hull to ensure good metallic contact. Never paint
them!

*Cover your boat so that snow and water will not gather inside. Always make
sure that there is enough ventilation and
avoid direct contact between the
boat and the covering material / canvas as it may damage the boat due to
friction and oxidation.
6.4.2 Measures after winter storage

Check the engine owner’s manual and carefully follow the instructions.

*Reinstall a freshly charged battery and check the voltage.

Refuel the boat

*Install any electronic instruments, textiles and other equipment that was
removed before winter storage. Test them after installation or at first time in sea
before leaving shore

Reinstall bottom drain plug

Check the condition of the hull. Repair damages directly. Refresh antifouling
paint if it has been used before or consider adding new paint if the boat is moved
to new waters (see chapter 6.2.2.)

Inspect fuel and ventilation hoses and connectors, check for any signs of wear &
tear and leakage.

Inspect fire extinguisher as per separate owner’s manual

Carryout maintenance operation on other accessories and equipment as
described in this chapter and in the respective OEM manuals
6.5 S
PARE PARTS
&
SERVICE
To ensure the best possible performance, safety and lifetime of your Ockelbo boat, it is
important to only use high quality spare parts that are suitable and approved for your
specific boat application. Failure to do so may jeopardize safety, lifetime and
performance. Parts are offered by Ockelbo through the dealer network.
Parts and accessories fitted on the boat are subject to modifications without prior
notice. Your dealer will be able to investigate if such is the case for your specific needs.
Your dealer can also support you with qualified service, upgrade and modification work,
using their own or Ockelbo specialists.