MANUAL ROTIS LIGHTING/REPLACING IGNITION BATTERY
17
REPLACING IGNITION BATTERY:
Remove grease pan. Open cart door or drawer. Remove old 9-volt battery as shown in figure 1. A pair
of needle nose pliers may be needed. The polarity direction on some models may vary. Pay attention to polarity
when removing battery. Install new 9-volt battery with the polarity in the same direction as the previous battery.
See figure 2.
FIG. 1
FIG. 2
MANUAL LIGHTING:
To manually light the rotisserie, place a butane lighter or long handled match near the tip of the thermo-
couple. Turn the control knob to “HI”. Hold the safety valve button in for about 4 to 5 seconds or until the burner
remains lit. Once lit, turn the control knob to desired setting. If the burner does not light within 4 or seconds,
release the safety valve button and turn the control knob to “OFF” and wait 5 minutes before trying again.