Document UT-MT-0780_EN
Page 32 of 39
Edition 03/10/2015
Supersedes edition 03/11/2014
LED INSET THRESHOLD AND THRESHOLD WING BAR LIGHT L
RTH04
INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE
Figure 21 – LED Module Replacement (Threshold)
Threshold Wing Bar fittings
disconnect the power supply connector from the LED module (Figure 21 – n°1)
remove the LED module (Figure 21 – n°2) and the relevant lens array (Figure 21 –
n°3) from the mounting plate
replace the LED module it with a new one
fasten the LED module and the relevant reflector with a tightening torque of 0.6
Nm
reconnect the power supply connector (Figure 21 – n°1) to the LED module
Reassembly the fixture following instructions of paragraph
“Closing the Fixture”,
“Leakage Test”
and
“Reinstalling the fixture”
.
Figure 22 – LED Module Replacement (Threshold Wing Bar)
4.6
ELECTRONICS REPLACEMENT
