OCEM IRM, Operation And Maintenance Manual

Page: 8 / 32

GENERAL
INFORMA
TION
UT-MT-0930_1.3_220421 (EN)
Operation and Maintenance Manual
IRM
8
1.6 Limited warranty
Energy Technology S.r.L. assures that all the IRM products marketed are free of manufacturing defects at the
time of shipment. This limited warranty will be valid for the period indicated in the sales agreement. THIS LIMITED
WARRANTY IMMEDIATELY DECAYS IF THE PRODUCT IS USED FOR PURPOSES OTHER THAN ORIGINALLY
INTENDED.
This limited warranty is provided by Energy Technology S.r.L. to the original purchaser of IRM products as identified by the
documents issued at the time of purchase. This limited warranty can be transferred to the subsequent purchasers of the Product,
only on condition that this Product is resold as NEW and with the original packaging.
Each change and/or tampering made to the product immediately ends of the warranty. Energy
Technology S.r.L. cannot be held responsible for any damage to items or persons deriving
from the failure to comply with instructions relating to installation, use and maintenance of
the product, and to the installation and storage environmental conditions stipulated by the
Manufacturer or by applicable rules regarding electrical devices and systems.
In case of potential defects or non‑usability of the Goods supplied, the applicable warranty that excludes any other legal warranty
and agreement ‑ applies to the defects of materials, in the design, and/or in the installation of the Goods supplied. The warranty
consists, depending on the Supplier, in the repair or replacement, at the expense of the Supplier, of each faulty component or
malfunctioning component from the beginning, but is not extended to damages arising from negligence or wear.
This warranty lasts for at least 12 months after the date on which the received Goods are put into service, but will not in any
case exceed 24 months from the shipping date.
FAA
For FAA certified products this warranty lasts for at least 4 years after the date on which
the received Goods are put into service, but will not in any case exceed 5 years from the
shipping date.
The Supplier undertakes to repair or replace the components in the shortest possible time without prejudice to the fact that for
the so called commercial components and more generally for the components supplied by third‑party manufacturers, will only
be applied the terms of the respective original manufacturer's warranties.
The warranty absolves from all liability the Supplier and does not apply to the damage of any kind, caused by: improper use
by the Customer or by the Customer’s staff, use of inadequate materials, or incorrect or insufficient treatments; installation
of equipments or spare parts not approved by the Supplier; installation and operating working of the Goods received without
following the indications and the instructions provided by the Supplier’s Technical staff; improper or excessive use, insufficient
maintenance, and/or works not carried out in conformity with the information provided in the use and maintenance instructions;
any other reason not attributable to the Supplier. The Customer must shoulder, at its own cost and employing its own staff,
without involving the Supplier, those repairs that on the base of the Supplier’s opinion are considered compliant at a moderate
level of technical know‑how.
The Customer must, under penalty of expiration, communicate the complaint concerning the defect or the non‑conformity to the
Supplier
within 8 days from the date of discovery of the defect
, and must send a written request to activate the intervention
under warranty. The intervention request under warranty must be sent to:
Energy Technology S.r.L. | via della Solidarietà, 2/1 | 40056 Valsamoggia BO (Italia)
info@ocem.com
The Customer must bear the travel and accommodation costs borne by the technical staff of the Supplier that must
complete on the installation site any intervention associated with the guarantee.
The warranty excludes any other damage, included those resulting from economic loss and from low production
capacity; direct, indirect or consequential damages; and the Contract termination.
The Supplier is not in any manner responsible for any other compensation or indemnity, including damage derived
from missed or reduced production, from the loss of chance, from the missed or reduced profit, from the loss of
contracts, impossibility of use or in general the partial use, in addition to indirect and/or consequential damages.