OCEM IRM, Operation And Maintenance Manual

Page: 16 / 32

INST
ALLA
TION
UT-MT-0930_1.3_220421 (EN)
Operation and Maintenance Manual
IRM
16
PROTECTIVE CONDUCTOR
230V
AC
POWER
CABLE ENTRY
SERIES CIRCUIT
CABLE OUTPUT
SERIES CIRCUIT
CABLE ENTRY
3.2 Installation of the device
Store the device in its original packaging until the time of installation.
Check the supply features before installing the device.
Use the device only in combination with series circuit powered by CCR regulator units by power not higher than
30 kVA, compliant with the standard IEC 61822, FAA AC 150/5345‑10 (L‑828, L‑829) and ICAO Annex 14.
Before proceeding with the operation, check the conditions of the device:
●
check that the mechanical fixing of the components are steady;
●
check that the internal connections are properly configured;
●
check that the internal equipotential connections are all realized;