Description
UT-MT-0972_1.0_19-09-2022 (EN)
Use and Maintenance Manual
LED PAPI 66
15
2.2
Content of delivery
L-880
PAPI/4 LHA
4 LIGHTS
L-881
A-PAPI/2 LHA
2 LIGHTS
LHA - Light Head Assembly
Pre-cabled unit with cables (power and control) 183 cm [6 ft] in length with
overmolded connectors L-823
4
2
Flexible wrinkled tube 1” in length 15,24 m [50 ft]
15,24 m [50 ft]
15,24 m [50 ft]
Column LHA (with breakable coupling) 12-3/4”
4
2
Column LHA (with breakable coupling) 14”
8
4
Flange 2”
12
6
Digital Clinometer with assembly screws
1
1
The kits include also all the connection cables attested and pre-cabled.
The isolation transformers necessary for the functioning of the unit are not included in the
supply. It is the customer’s responsibility to arrange appropriate certified equipment to
supply the units.
The units communicate with each other by means of a CAN type communication bus (CAN BUS).
In the PAPI system is included a digital clinometer to perform the alignment and the adjustment of the LHA unit.
For further information on the use of the clinometer, please refer to the manual included in the supply.
Calibrate the clinometer before each use.
Clinometer calibration can be easily performed by the maintenance personnel, carefully
following the instrument's instructions.
