9
OceanLED INSTALLATION MANUAL / DOCK / 120416 / v6.2
Chapter 3: Operation, Maintenance, Repair, & Parts
3.1 Cleaning Instructions
Sea growth can collect quickly on the light and this can reduce the performance in just a few weeks.
To prevent the build- up of sea growth, all OceanLED lights have been coated with a specialized
Tritonium coating which makes the surface of the glass lens a non-stick layer which helps ward off long
term barnacle buildup. Lights should be cleaned with a boat brush or similar biweekly or as needed to
keep the lens of the light clear. Growth varies greatly around the world and maintenance
is imperative to the proper operation and longevity of the product. If heavy fowling occurs, barnacles
can be removed from the lens using a plastic scraper and moderate pressure. This can be done in the
water or the light can be removed and cleaning can be done dockside using a plastic scraper and water
or mild detergent.
CAUTION
:
Harsh cleaning solvents such as acetone may damage the light.
3.2 Replacement Parts
Lost, broken, and worn parts should be replaced immediately and can be obtained through your dealer or
from the manufacturer.
If the external flexible cable of this unit is damaged, contact your local OceanLED representative to arrange
for replacement (cable must only be replaced by OceanLED, service agent or a similar qualified person).
3
CHAPTER
THREE