88
3
CHAPTER
THREE
Chapter 3: Installing the DMX WIFI Touch Panel Controller
3.1 Connect the wires
1.
Connect the DMX Output Pigtail cable to the green connector (LEDs, Dimmers, Fixtures..)
(Brown+Brown/White=ground, Orange=DMX-, Orange/White=DMX+)
2.
POWER: Connect the AC/DC adapter. (Black/White Stripe=Positive, Black=Ground)
3.
Ports 1,2,3,and 4 : If your application needs to have some external contact closures, make the
contacts between the ground and the ports.
3.2 Mount the interface in a dry location
4.
Plug the green connector block
into the rear of the DMX WIFI
Touch Panel Controller.
5.
For Wifi plug the local ethernet
cable into the rear of the DMX wifi
touch panel controller.
6.
Mount the back plate of the
interface on the preferred
mounting location. (in a dry
place) 168 x 128 x 11.5mm.
7.
Close the unit by clipping the
front panel onto the back
plate.
OceanLED INSTALL / DMX Controller / 073114 / v4.2
