manualshive.com logo in svg

Oceanic VT Pro, Operating Manual

Share
Download
Oceanic VT Pro Operating Manual Download Page 44

44

Setting Link Code (continued) -

•  Press and release the Side (Select) button to change the

Second digit.

•  Press the Front (Advance) button to accept the Second digit.

The Third digit begins to flash.

•  Press and release the Side (Select) button to change the Third

digit.

•  Press the Front (Advance) button to accept the Third digit.

The Forth digit begins to flash.

•  Press and release the Side (Select) button to change the

Fourth digit.

•  Press the Front (Advance) button to accept the Fourth digit.

The Fifth digit begins to flash.

•  Press and release the Side (Select) button to change the Fifth

digit.

•  Press the Front (Advance) button to accept the Fifth digit.  The

Sixth digit begins to flash.

•  Press and release the Side (Select) button to change the Sixth

digit.

•  Press the Front (Advance) button to accept the 6 digit Code

and/or advance to Surface Mode

R

E

S

P

O

N SIBLE

D

IV

E

R

Summary of Contents for VT Pro







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands