Oceanic PROPLUS X, Operating Manual

Page: 43 / 61

43
PROPLUS X OPERATING MANUAL
© Pelagic, 2016 Doc. No. 12-5655-r01 (8/19/16)
WARNING DURING DECOMPRESSION
When O2 SAT reaches the Warning Level, the audible alarm sounds and the O2 SAT value will flash in the middle of the screen. When the
audible alarm is silenced, the O2 Sat value will alternate with Decoo Stop/Time.
AR
%
20
GAS 1
32%
FO2 PO2
1.20
75
FT
100
TL
%
1024
PSI
(v) TO MENU - (>) TO COMPASS
19
GTR
WARNING
02SAT = 80%
AR
%
0
GAS 1
32%
FO2 PO2
1.40
75
FT
100
TL
%
1003
PSI
(v) TO MENU - (>) TO COMPASS
19
GTR
ALARM
GO UP

O2 = 100%

ALARM DURING DECO
If O2 SAT reaches the Alarm level, the audible alarm sounds and the O2 SAT value will flash in the middle of the screen. When the au-
dible alarm is silenced, the message O2 SAT 100% will display solid until on the surface.
GAS 1
36%
FO2 PO2
1.40
SURF
:
0 07
100
TL
%
1067
PSI
(v) TO MENU - (>) TO COMPASS
--
GTR
ALARM
O2 = 100%
ALARM ON SURFACE
• If O2 SAT is 100% upon surfacing while in No Decompression, O2 SAT = 100% will flash until the O2 SAT value decreases below
100%.
• If O2 SAT becomes less than100% during the first 5 min on the surface, the Delayed Violation 1 Main screen will be displayed.
• If O2 SAT is still 100% after 5 min, operation is to revert to Violation Gauge Mode for 24 hours.