Oceanic OCEAVP45W2 User Manual Download Page 12

Remote Control Battery Compartment

- Please ensure that the batteries are inserted in the correct direction.

- Do not mix battery types.

- When replacing, ensure both batteries are changed at the same time.

- 2 x AAA size batteries required

- Batteries should not be exposed to excessive heat such as sunlight or fire.

- Batteries should be recycled or disposed of properly.

Press the ON/OFF button to switch the fan on and off. When switched on, press the SPEED button

to make the fan switch from one speed to another, from low to high speed. The corresponding will

LED light up on the fan body.

Push or pull the OSC button on the motor to oscillate the head or keep it in a fixed position.

When first switched on, the MODE LED will glow red indicating that the unit will operate in normal

mode. The TIMER key adjusts or turns off the timer. Timings between0.5-7.5hrs can be selected.

You can set the operating time by successively pressing the TIMER button. When an indicator light

remains fixed for one of the durations (0.5h, 1h, 2h, 4h) this means that the following presses will

add up: 1 hour fixed followed by one press will turn on the indicator lights for 0.5h and 1h, bringing

the total duration to 1.5h.

the same applies up to a maximum duration of 7.5h (all the LEDs will be on 0.5 + 1h + 2h + 4h =

7.5h). "

Remote control operations are identical to the functions on the fan control panel.

Press the Sleep, Natural and Normal mode button to select the required mode.

Natural mode:

With medium speed selected, the speed alternates between medium and low speeds.

With a low speed selected, the fan will alternate between low speed and the idle position.

Sleep mode:

- The fan will operate at high speed in Natural mode for 30 minutes, at medium speed in Natural

mode for 30 minutes, and then it will operate at low speed in Natural mode for the remaining time.

- The fan will operate at medium speed in natural mode for 30 minutes, and then at low speed in

Natural mode for the remaining time.

- With low speed selected: The fan will operate at Low speed in Natural mode.

Summary of Contents for OCEAVP45W2















Reviews: