Oceanic OCEALEDCC195W2, User Manual

Page: 52 / 88

51
The Way Of Installing Base:
The Way Of Unloading Base:
1. Please remove the screw between the base and shaft (as shown figure 1).
2. Left hand hold the cabinet of the unit,right hand hold the base then remove the stand.
(as shown figure 2)
1. Please put the base on the desk as shown figure 1.
(the stand approximately 180 degrees from horizontal).
2. Put the hole of the base upright into shaft of unit(as shown figure 2).
3. Fix the stand and the screen with 4 screws (figure 3)
4. The rendering after installed (as shown figure 4).
2
1 2
4 3 2
3
II - Base Installation Guide