Page 34 of 44
⚫
To set the minute when
is flashing: press
/
to adjust it among 00-59
⚫
To confirm the minute and move to set the day of the week: press
OK
⚫
To set the day of the week when
is flashing: press
/
to adjust it among 1-7
⚫
To complete the time setting: press
OK
or wait 30 seconds without action, the appliance will
return to Standby mode.
2.
Mode selection (
/
button)
⚫
Press
/
to toggle among the modes:
Icon
Function
Explanation
Comfort mode
Set the temperature you desire between
5°C - 29°C.
ECO mode
3.5°C lower than Comfort mode.
Anti-freeze mode
The appliance maintains the temperature
around 7°C.
Program modes
P1-P7 weekly personalized program
(
please refer to part 3 “Program mode
setting” to learn how to set this mode)
Pilot wire mode
The device can be controlled by the
external programmer. Function will be
displayed accordingly.
See below Table 1
⚫
Program modes and
Pilot wire mode
share the same icon
.
And these 2 modes are mutually exclusive.
When the device is working on Program mode, press and hold
OK
button for 3 seconds, it will
shift from Program mode to Pilot wire mode. When the device is working on Pilot wire mode,
press and hold
OK
button for 3 seconds, it will shift from Pilot wire mode to Program mode.
The interface of program mode and Pilot wire mode are as below:
Program mode Pilot wire mode
⚫
Under Pilot wire mode, choose the mode via the external control (for France only). For other
Press
OK
for
3
seconds to shift.
