Oceanic OCEAIFC1000W, Instruction Manual

Page: 29 / 52

28
EN
resetting of the thermal cutout, this appliance must not
be supplied through an external switching device, such
as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
• The heater must not be located immediately below a
socket-outlet.
• Means for disconnection having a contact separation in
all poles must be incorporated in the fixed wiring in
accordance with the wiring rules.
• For correct installation on the wall, thanks to refer to
‘Installation on wall’ part.
• Fixed heaters are to be installed so that switches and
other controls cannot be touched by a person in the
bath or shower.
• Connect the two conductors and the pilot wire of the
supply cord to a connection box in respecting the
following polarities:
- Live: Brown - Neutral: Blue
- Pilot wire: Black
• This heater is filled with a precise quantity of special oil.
Repairs requiring opening of the oil container are only to
be made by the manufacturer or his service agent who
should be contacted if there is an oil leak;
• When scrapping the heater, follow the regulations
concerning the disposal of oil.
• WARNING: In order to avoid overheating, do not cover
the heater.
Warning: this product shall be installed in the volume 2