46
VI. TROUBLE SHOOTING
•
Repairs must be performed by an authorized personnel only. Improper repairs can
cause considerable danger to the user.
•
However, some minor problems can be resolved as follows:
Breakdown
Possible Cause
Solution
No ignition
No spark
Check the power
supply
The burner cover is
not properly assembled
Assemble properly
lid
The gas supply is turned
off
Fully open the gas
supply
The device turns
on incorrectly
The gas supply is
not fully open
fully open
gas supply
The burner cover is not
properly assembled
Assemble the burner cap
correctly
The spark plug is
contaminated with
foreign substances
Substance wipe with a dry
cloth
The burners are wet
Carefully dry the
burners
The holes in the flame
spreader are blocked
Clean the flame
spreader
There is noise during
combustion and ignition
The burner cover is not
properly assembled
Assemble the burner cap
correctly
The flame goes out
during use
The flame detection device
is contaminated with
substances
Foreign
Clean the flame
monitoring device
The products being cooked
boiled and put out the flame.
Turn off the burner knob. Wait
one minute and turn again
burner.
A strong current of air can have
extinguished the flame
Please turn off the button and
check the cooking area to
check if there is not an open
window. wait a
minute and light the burner
again.
yellow flame
The flame spreader
holes are blocked
Clean the flame
spreader
A different gas is used
Check the gas used.
